Rippeon Equipment Co., Maryland
Kubota
TRANSLATE
Rippeon Equipment Co., Maryland
Gaithersburg
866-Rippeon
700 East Diamond Ave
Gaithersburg, MD 20877
Call Us
Directions
Frederick
866-Rippeon
9640 Liberty Rd
Frederick, MD 21701
Call Us
Directions
Westminster
866-Rippeon
1115 Baltimore Blvd
Westminster, MD 21157
Call Us
Directions
Baltimore
866-Rippeon
3828 Washington Blvd
Baltimore, MD 21227
Call Us
Directions
Used Inventory »
New Inventory »

Ryan Lawnaire IV with EST

New Equipment / Ryan / Aerators / Walk Behind Aerators / Lawnaire IV with EST

Lawnaire IV with EST for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Ryan Lawnaire IV with EST for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Ryan Lawnaire IV with EST for sale at Rippeon Equipment Co., Maryland

 

Features

  1.  3/4” (19MM) DIAMETER, STEEL CORING TINES
    Unlike everyone else, our hardened alloy steel coring tines stay in the ground when you turn—and are durable enough to keep you out on the turf and out of the shop.

  2. EASY STEER TECHNOLOGY
    Save your strength with Easy Steer Technology and easily maneuver along paths and contours—even 180° turns. Outer tines rotate faster during turns to maintain deep core penetration without tearing up turf, increasing your productivity without sacrificing quality.

  3. SIZED TO YOUR NEEDS
    Facing tight terrain and landscaping? The Lawnaire IV will fit with its slim 19-inch aeration width.

Specifications

HONDA® Engine Model 4-cycle Honda® GX120; recoil start;
on/off switch; low-oil alert
Displacement 7.2 cu in. (118 cc)
Fuel Capacity 0.53 gal (2 L)
Oil Capacity 0.59 qt (0.56 L)
Clutch Belt tightener
Drive: Primary 4L section V-belt
Drive: Tine & Drum Single #40 nickel-plated chain
Tines 0.75 in. (19 mm) diameter coring-type formed from
0.08 in. (2 mm) hollow, hardened alloy steel
# of Tines 30 tines per aerator
Lubrication Grease fittings on the wheels, tine wheels
and idler pivot/oil chain
Coring Depth Up to 2.75 in. (70 mm)
Core Diameter 0.75 in. (19 mm)
Aeration Pattern 3.75 in. x 7 in. (95 mm x 178 mm)
Aerating Width 19 in. (483 mm)
Holes Per Square Foot (single pass) Up to 9 per sq ft (59/m2)
Productivity Aerates up to
29,000 sq ft/hr (2694 m2/hr)
Tires (2) 8 in. x 2.25 in. semi-pneumatic
with ball bearings
Weight:
Wet w/o Weights		 220 lb (100 kg)
Weight:
Wet w/ Weights		 261 lb (118 kg)
Weight:
Wet w/Weights &
Water in Drum		 304 lb (138 kg)
Width 28 in. (711 mm)
Length 53.5 in. (1,359 mm)
Height 48.5 in. (1,232 mm)